China Factory Half Inch 1/2'' Tubing Clamp On Flow Sensor

China Factory Half Inch 1/2'' Tubing Clamp On Flow Sensor

I INTRODUCTION

ML-F8 is very unique in its structural design. It uses a circular magnetic steel to achieve automatic connection during installation.It takes only 2-3 minutes to complete the whole process from installation to measurement. It also adopts the current popular OLED display, which makes it easy to read in low light conditions.

• Clamp on type, no need to cut the pipe or do any other changes.
• No professional product knowledge required, installation and measurement can be done based on the guide.
• No moving parts or pressure changes involved, installation can be done without stop provide.

II. SPECIFICATION

Model: ML-F8

Velocity Range: 0.1 m/s ~ 5.0 m/s

Accuracy: ± 2.0%

Repeatability: 0.80%

Pipe Size: DN15,DN20,DN25,DN32,DN40,DN50

Data Storage: Daily, Monthly, Yearly Totalizer

Analog output: 4~20mA, Maximum load: 600Ω

Alarm output: OCT, Upper and lower limit alarm function (for option)

Communication: RS485,support Modbus communication protocol

Power Supply: 24VDC

Cable Length: 1.8m

Keypad: Four light touch buttons

Screen: OLED 128*64 screen display

Units: Metric and imperial units are available

Cubic Meters(m3), Liters(L),USA Gallons(GAL)/hour, USA Gallons(GAL)/min
Default unit setting: m3/h

Totalizer: Six bit digit

Piper Material: Stainless steel pipe, carbon steel pipe, PVC

Case Material: Aluminum alloy

Environment Temp.:0℃-50℃

Medium Temp.:0℃-50℃

Environment Humidity: 0-95% relative humidity, without condensation

IP Grade: IP54

III. WORKING PRINCIPLE

Ultrasonic flow meters use sound waves at a frequency beyond the range of hearing (typically 0.5, 1, or 4 MHz). This ultrasound signal is sent into a stream of flowing liquid by using wetted (insertion) transducers that make direct contact with the liquid or external (clamp-on) transducers that send the ultrasound through the pipe wall. Clamp-on ultrasonic flow meters allow users to measure the volumetric flow rate of a fluid in a pipe without having to penetrate the pipe which decreases installation and maintenance costs.

A typical transit-time ultrasonic liquid flow meter utilizes two ultrasonic transducers that function as both ultrasonic transmitter and receiver. The ultrasonic flow meter operates by alternately transmitting and receiving a burst of ultrasound between the two transducers by measuring the transit time that it takes for sound to travel between the two transducers in both directions. The difference in the transit time (∆ time) measured is directly proportional to the velocity of the liquid in the pipe.

Why choose ultrasonic?

Ease-of-Installation: The largest benefit of any “clamp-on” transit-time flow meter is the ease-of-installation. While still requiring sections of straight pipe upstream of the measurement location, the process does not require shutting the system down to install, making maintenance and upkeep of transit-time meters much more attractive.

Low maintenance: There are no blades to wear out or bearings to replace as in turbine meters, nor are there electrodes that can foul over time as in magnetic flow meters.

III. PIPE SPECIFICATION

IV. INSTALLATION STEPS

VI. Company Profile

Melan Measurement & Control Instruments is located in Shanghai City. It is a high-tech manufacturer specialized in the design, development, manufacturing and sale of measurement and control instruments.

Our products are widely used in various fields, including electricity, chemical industry, metallurgy, brewing, oil and gas, textile, water conservancy, environmential protection, etc.

We own independent-courtyard modemized manufacturing workshops and an open office building. Melan has accumlated production and management experience in instruments from European and American and domestic famous companies.

We own first-class talent team, and all the products have reached advanced level at home and abroad. We provide our customers with complete and professional test control solutions and high-tech and high-quality products.

Melan is your reliable friend and partner. We are willing to try our best as dedication and perfection as motivation.




VII. FAQ

Q: How long will you give me the reply?
A: We will contact you in 5 hours as soon as we can.

Q: What is the warranty of your prducts?
A: Our warranty is 12 months after the shipping date.

Q: What is the lead time of your products?
A: Normally our factory lead time is 10-12 working days.

Q: Can I OEM your products?
A: OEM and ODM customization are welcomed.

Q: What is your MOQ?
A: We have no MOQ limit, small quantity order is acceptable.

Q:What is the transport?
A: Express such as DHL, FedEx, UPS for freight prepaid, and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by sea.