Melan Measurement & Control Instruments (Shanghai) Co.,Ltd.
MELAN MEASUREMENT & CONTROL INSTRUMENTS (SHANGHAI) CO., LTD.
Add to Cart
Top Quality Intelligent Vortex Flowmeter for Sale
1. Design & Installation
It is important to install meter,if not installed well, then would affect precision, use-life and damage.
1． To avoid strong current, high frequency and powerful switch set, power supply of meter shall be avoided to near by these equipments.
2． To avoid high-Temp & radiation source. if have to install it, need heat insulation & ventilated measure.
3． To avoid high-Temp & enchant gas, if have to install it, need ventilated measure.
4． Vortex flow meter shall be avoided to install on shaking part of pipeline. If have to install on it,shall add clamp device and vibration pad which located on 2D to enhance shake proof . meter has better to installed indoors, pay attention to waterproof when installing meter outdoors,special notice the joint, make cable conductor to U shape to avoid water get into the amplifier body Around installing place shall save enough space,so that install connection line and maintenance routine
2. Specifications
1) Measuring medium: Steam,gas, liquid(Avoid of multiple- direction fluid)
2) Accuracy:Liquid:1.0% Gas:1.5%
3) Repeatability:Liquid 0.33% Gas:0.5%
4) Range:Liquid:0.7m/s~7m/s Gas:7m/s~40m/s
5) Working pressure:Standard 1.6MPa,2.5~4.0 MPa (on request)
6) Fluid temperature:-40℃~250℃(Common type)；100℃~350℃(High-temperature type)
7) Body material:304 stainless steel(SS316 is optional)
8) Output signal:Pulse(three wires,low level≤1V;High level≧4V);4~20mA;RS485
9) Power supply:24VDC(12VDC),Lithium battery
10) Ambient temperature : -35 ℃ ~ 60 ℃ ( without LCD ); -5℃~60℃(with LCD)
11) Relative humidity:5~95%
12) Protection level:IP65
13) Electrical connection:M20*1.5
3. Dimensional Sketche
| DN | A(mm) | B(mm) | C(mm) |
| 25 | 65 | 65 | 368 |
| 32 | 66 | 65 | 374 |
| 40 | 80 | 76 | 382 |
| 50 | 80 | 89 | 388 |
| 65 | 93 | 102 | 402 |
| 80 | 100 | 114 | 408 |
| 100 | 126 | 136 | 435 |
| 125 | 146 | 160 | 463 |
| 150 | 166 | 182 | 489 |
| 200 | 196 | 248 | 543 |
| 250 | 210 | 282 | 596 |
| 300 | 240 | 334 | 648 |
4. Configuration
| LUGBML Series Vortex Flow Meter Configuration | |||||||||||||
| Model | LUGBML | ||||||||||||
| Sensor Installation | D | Clamp Type Sensor | |||||||||||
| F | Flange Type Sensor | ||||||||||||
| C | Insertion Type Sensor | ||||||||||||
| Medium | L | Liquid | |||||||||||
| G | Gas | ||||||||||||
| S | Steam | ||||||||||||
| Pipe Material | 25 | 25mm | |||||||||||
| ...... | |||||||||||||
| 300 | 300mm | ||||||||||||
| Power Supply | A | Duplicate Supply(24VDC/12VDC+3.6V Lithium Battery) | |||||||||||
| B | 3.6V Lithium Battery | ||||||||||||
| C | 24VDC/12VDC | ||||||||||||
| Display | D | With Digital Display | |||||||||||
| P | Without Digital Display | ||||||||||||
| Output | N | None | |||||||||||
| P | Pulse | ||||||||||||
| A | 4-20mA | ||||||||||||
| R | RS485 | ||||||||||||
| H | Hart | ||||||||||||
| Flange Type | G | GB (Standard) | |||||||||||
| A | ANSI | ||||||||||||
| J | JIS | ||||||||||||
| B | BS | ||||||||||||
| O | Others | ||||||||||||
| Sensor Material | A | 304 SS (Standard) | |||||||||||
| B | 316 SS | ||||||||||||
| O | Others | ||||||||||||
| Medium Temperature | E | 40~250℃ | |||||||||||
| H | 100~350℃ | ||||||||||||
| Rated Pressure | 16 | 1.6MPa | |||||||||||
| 25 | 2.5MPa | ||||||||||||
| 40 | 4.0MPa | ||||||||||||
| O | Others | ||||||||||||
| Protection Class | 0 | IP65 | |||||||||||
| Explosion Proof | 0 | None | |||||||||||
| EX | Explosive Proof | ||||||||||||