
Add to Cart
Portable Ultrasonic Flow & Engergy Meter
I. Introduction
II. Specification
Performance | |
Velocity Range | ±0.09ft/s ~ ±39ft/s (±0.03m/s ~ ±12m/s) |
Accuracy | ±1% of measured value |
Repeatability | 0.2% of measured value |
Linearity | ±1% |
Pipe Size | DN25~DN1200(A pair of sensors) |
Function | |
Output | Analog output: 4~20mA, max load 750Ω. |
Pulse output: 0~10KHz | |
Communication | RS485 Modbus |
Power Supply | Rechargeable Lithium Battery Power,3000mAh |
Display | 240*128 back lit LCD |
Temperature | Transmitter: -14℉~140℉(-20℃~60℃) |
Transducer:-40℉~176℉(-40℃~80℃,D1) | |
Transducer:-40℉~266℉(-40℃~130℃,D1U) | |
Humidity | Up to 99% RH,non-condensing |
Physical | |
Transmitter | NEMA13, IP54 |
Transducer | Encapsulated design,IP68 |
Double-shielded transducer cable | |
Standard/maximum cable length:30ft/1000ft(9m/300m) |
III.Accessories
IV. Configuration
Model | Transmitter |
ML-6100P | PortableType |
Velocity Range:±0.09ft/s ~ ±39ft/s (±0.03m/s ~ ±12m/s) | |
Accuracy :±1% of the measure value | |
Repeatability:0.2% of the measure value | |
Display:240*128 back lit LCD | |
Internal Lithium Power Supply: 3000mA | |
Transmitter Enclosure: IP54 | |
Output: OCT pulse output 0-10KHz, Relay output, 4-20mA for option | |
Communication: RS485 | |
Code | Type of Trnansmitter |
1 | Ultrasonic Flow Meter |
2 | Ultrasonic Energy / BTU Meter(RTD) |
Code | Transducer |
D1 | Clamp-on, IP68. Operating temperature:-40 ℉ ~ +176 ℉(-40℃ ~ +80 ℃) |
D1U | Clamp-on, IP68. Operating temperature:-40 ℉ ~ +266℉(-40℃ ~ +130 ℃) |
Code | Type of Mounting Bracket |
ST | Single guide mounting type bracket |
DT | Double guide mounting type bracket |
Code | Transducer Cable Length |
P5 | Standard length 16ft (5m) |
PXX | XX is the length you need for cables, Maximum length is up to 30m. |
Code | Temperature Transducer |
PT1000 | PT1000 temperature transducer+RTD module(option) |