Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials.
Transducer models are available for special application, including for coarse grain material and high temperature applications.
Two-Point Calibration function.
Two work modes: Single point mode and Scan mode.
Coupling status indicator showing the coupling status.
Optional software to process the memory data and print on the PC via USB port

2. Specification

Display	4.5 digits LCD with EL backlight
Measuring Range	0.75～300mm (in Steel)
Sound Velocity Range	1000~9999 m/s
ML160	0.1/0.01mm
Accuracy	±(0.5%Thickness+0.04)mm, depends on materials and conditions
Units	Metric/Imperial unit selectable
Power Source	Two “AA” size, 1.5 Volt alkaline batteries. 100 hours typical operating time (EL backlight off
Communication	USB port
Outline dimensions	150×74×32 mm. Weight:245g
Memory	20 files (up to 99 values for each file) of stored values
Mode	Four measurements readings per second for single point measurement, and ten per second for Scan Mode

Appendix : Transducer Selection

Model	Frequency MHz	Diameter mm	Measuring Range	Lower limit	Description
N02	2．5	14	3.0mm～300.0mm (In Steel)	20	for thick, highly attenuating, or highly scattering materials
N05	5	10	1.2mm～230.0mm (In Steel)	Φ20mm×3.0mm	Normal Measurement
N05/90°	5	10	1.2mm～230.0mm (In Steel)	Φ20mm×3.0mm	Normal Measurement
N07	7	6	0.75mm～80.0mm (In Steel)	Φ15mm×2.0mm	For thin pipe wall or small curvature pipe wall measurement
HT5	5	12	3～200mm (In Steel)	30	For high temperature (lower than 300℃) measurement

Two Point Calibration USB Port Ultrasonic Thickness Gauge

Industrial Flow Meter