0 - 10V Hydrostatic Level Transmitter 0.2% / 0.1% Accuracy Liquid Level Transmitter

0 - 10V Hydrostatic Level Transmitter with 0.2% / 0.1% Accuracy

1. Introduction

ML2000T series static liquid level transmitter adopts imported silicon pressure transducer as sensitive element, utilizing reasonable industry structure to finish stainless steel sealing package. The amplifying circuit can ensure measurement accuracy through laser compensation . The electrical connection cable applies is anti corrosive gas shielded cable which makes the back pressure chamber is directly connected to the atmosphere. Therefore it is suitable for measurement of all kinds of canned liquids in the industry field in which it converts pressure measured into 4-20mA standard current signal. It can also be assembled with other instruments to realize automatic control. This product is widely used in petroleum,chemical, textile, metallurgy, electricity, water conservancy, environmental protection, brew-age.

2. Features

• The tested medium is extensive. As long as the liquid is compatible with the diaphragm material and the paste, it can be measured.
• The lifetime is long for it has stainless steel material, reasonable sealing package and special cable.
• It has high accuracy and good stability. The transducer realizes temperature compensation with 0-85℃ and eliminates accuracy influence caused by temperature drift through compensation circuit.
• ML2000T series is easy installed. Just immerse the probe into medium directly and connect the signal cable to secondary instrument. Adapt to small installation space. When installation, please try to fix the cable to avoid shaking of transducer for shaking can influence the accuracy and lifetime of the transducer.
• Upgrade features:

①　Power supply non polar connection

②　Field or Outside lightning prevention design

3. Technical Parameter

• Accuracy: ±0.2% or ±0.1%
• Measuring Range: 0~200mH₂O
• Stability: <0.1%FS Per Year
• Overload Limit: 200%
• Power Supply: 24VDC or 12VDC
• Signal Output: Two-wired 4-20mA
• Overload Limit: 150%~300%
• Lag: Full Span Better Than 0.01%
• Working Temperature: 0~85℃
• Storage Temperature: -40~85℃

4. Structure & Material

• Isolation Diaphragm: 316L Stainless Steel
• Transducer: Stainless Steel(Cylinder Shape)
• Sealing: Fluorine Rubber
• Cable: PVC Cable With Shield
• Product Types: Common, Oil Resistance, Corrosion Resistance

5. Configuration

6. Pressure Level Transmitter

Gauge Pressure Transmitter

Differential Pressure Transmitter

Capacitance Level Transmitter

Hydrostatic Level Transmitter

Submersible Level Transmitter