Melan Measurement & Control Instruments (Shanghai) Co.,Ltd.
MELAN MEASUREMENT & CONTROL INSTRUMENTS (SHANGHAI) CO., LTD.
Add to Cart
IP65 Thread Type Industrial Flow Meter Turbine Flow Transmitter Simple Structure
1. Introduction
LWGYML series turbine flow meter is a new generation kind of flow meter that absorbs the advanced technologies of flow meter at home and abroad. It has been optimized and designed to have so many characteristics, such as simple structure, light weight, high precision, good repeatability,easy installation and usage.
2. Features
3. Application
Turbine flow meters are widely used in the following measurement objects: oil, organic liquid, inorganic liquid, liquefied gas, natural gas, gas and low temperature fluid. In the foreign liquefied petroleum gas, refined oil and light crude oil transfer and gathering stations, the first and last stations of large crude oil pipeline are widely used for trade settlement. Turbine flowmeters in Europe and the United States are second only to orifice flowmeters for natural gas metering. The Netherlands alone has adopted more than 2600 gas turbine flowmeters of various sizes and pressures from 0.8 MPa to 6.5 MPa. They have become excellent natural gas flowmeters. Although the excellent metering characteristics of turbine Flowmeter are favored by people, it gives the impression that the moving parts are short in use and hesitant in selection. After people's unremitting efforts, it should be said that the situation has greatly improved. Turbine flowmeter as the most general flowmeter, its products have developed into multi-variety, full-series, multi-specification mass production scale.
In addition to the extensive use of the aforementioned industrial sectors, turbine flowmeters are also widely used in special sectors, such as scientific research and experiments, national defense science and technology, and metrology. The use of these fields avoids its weaknesses (not suitable for long-term continuous use) and gives full play to its characteristics (high precision, good repeatability, and can be used in conditions such as high pressure, high temperature, low temperature and micro In these fields, most of them are designed according to the special requirements of the subject, and they are special instruments without mass production.
4. Specifications
| Pipeline Diameter(mm) and Connection | 4,6,10,15,20,25,32,40 Thread Connection |
| (15,20,25,32,40) 50,65,80,100,125,150,200 Flange Connection | |
| Accuracy | ±1%R,±0.5%R,±0.2%R(Special Order) |
| Turn Down Ratio | 10:1; 15:1; 20:1 |
| Material | 304SS,316(L)SS, etc |
| Medium Temperature | -20℃~+110℃ |
| Environmental Conditions | Temperature: -10℃~+55℃ Relative humidity: 5%~90% Atmospheric pressure: 86~106KPa |
| Power supply | Sensor:+12VDC,+24VDC(Option) Transmitter:+24VDC Local Display:3.2V Lithium Battery |
| Output Signal | Sensor:Pulse Frequency Signal(Low level≤0.8V, High level≥8V) Transmitter:Two Wired 4-20mA Current Signal |
| Signal Cable | STVPV 3x0.3(Three Wired),2x0.3(Two Wired) |
| Signal Cable Connection | Houseman Connector(Standard Type) Inner Thread M20x1.5(Explosion Type) |
| Transmission Distance | ≤1000m |
| Explosion Proof | None(Standard Type) EXdIIBT6(Explosion Proof) |
| Protection Class | IP65 |
5. Flow Range & Work Pressure
| Pipeline Diameter | Normal Flow Range (m³/h) | Extended Flow Range (m³/h) | Normal Pressure (MPa) | Pressure Rate(MPa) (Flange Connection) |
| DN4 | 0.04~0.25 | 0.04~0.40 | 6.3 | 12,16,25 |
| DN6 | 0.10~0.60 | 0.06~0.60 | 6.3 | 12,16,25 |
| DN10 | 0.20~1.20 | 0.15~1.50 | 6.3 | 12,16,25 |
| DN15 | 0.60~6.00 | 0.40~8.00 | 6.3,2.5 (Flange Connection) | 4.0,6.3,12,16,25 |
| DN20 | 0.80~8.00 | 0.45~9.00 | 6.3,2.5 (Flange Connection) | 4.0,6.3,12,16,25 |
| DN25 | 1.00~10.00 | 0.50~10.00 | 6.3,2.5 (Flange Connection) | 4.0,6.3,12,16,25 |
| DN32 | 1.50~15.00 | 0.80~15.00 | 6.3,2.5 (Flange Connection) | 4.0,6.3,12,16,25 |
| DN40 | 2.00~20.00 | 1.00~20.00 | 6.3,2.5 (Flange Connection) | 4.0,6.3,12,16,25 |
| DN50 | 4.00~40.00 | 2.00~~40.00 | 2.5 | 4.0,6.3,12,16,25 |
| DN65 | 7.00~70.00 | 4.00~70.00 | 2.5 | 4.0,6.3,12,16,25 |
| DN80 | 10.00~100.00 | 5.00~100.00 | 2.5 | 4.0,6.3,12,16,25 |
| DN100 | 20.00~200.00 | 10.00~200.00 | 1.6 | 4.0,6.3,12,16,25 |
| DN125 | 25.00~250.00 | 13.00~250.00 | 1.6 | 2.5,4.0,6.3,12,16 |
| DN150 | 30.00~300.00 | 15.00~300.00 | 1.6 | 2.5,4.0,6.3,12,16 |
| DN200 | 80.00~800.00 | 40.00~800.00 | 1.6 | 2.5,4.0,6.3,12,16 |
6. Installation Dimension
According to the diameter, choose thread or flange connection to install the senor. As to installation method, please check Pic4, Pic5, Pic6.
Pic4 LWGYML-4~10 Structure & Installation Dimension Diagram
Pic5 LWGYML-15~40 Structure & Installation Dimension Diagram
Pic6 LWGYML-50~200 Structure & Installation Dimension Diagram
| Pipeline Diameter | L | Thread Connection | Flange Connection | ||
| (mm) | G | D (mm) | d (mm) | n | |
| DN4 | 295 | G1/2 | |||
| DN6 | 330 | G1/2 | |||
| DN10 | 450 | G1/2 | |||
| DN15 | 75 | G1 | θ65 | θ14 | 4 |
| DN20 | 80 | G1 | θ75 | θ14 | 4 |
| DN25 | 100 | G1-1/4 | θ85 | θ14 | 4 |
| DN32 | 120 | G2 | θ100 | θ14 | 4 |
| DN40 | 140 | G2 | θ110 | θ18 | 4 |
| DN50 | 150 | θ125 | θ18 | 4 | |
| DN65 | 170 | θ145 | θ18 | 4 | |
| DN80 | 200 | θ160 | θ18 | 8 | |
| DN100 | 220 | θ180 | θ18 | 8 | |
| DN125 | 250 | θ210 | θ25 | 8 | |
| DN150 | 300 | θ250 | θ25 | 8 | |
| DN200 | 360 | θ295 | θ25 | 12 | |
7. Configuration
| LWGYML Series Turbine Flow Meter Configuration | ||||||||||
| Model | LWGYML | |||||||||
| Pipe Material | 4 | 4mm | ||||||||
| 6 | 6mm | |||||||||
| 10 | 10mm | |||||||||
| ...... | ||||||||||
| 200 | 200mm | |||||||||
| Model Description | N | No Display,12VDC Power Supply,Pulse Output, High Level≥8V Low Level≤0.8V | ||||||||
| A | No Display,4-20mA 2 Wired Current Output | |||||||||
| B | Local Display,Battery Operated | |||||||||
| C | Local Display,4-20mA 2 Wired Current Output | |||||||||
| C1 | Local Display,RS485 Output | |||||||||
| C2 | Local Display, HART Output | |||||||||
| Accuracy | 05 | 0.5 Grade | ||||||||
| 10 | 1.0 Grade | |||||||||
| Turbine Type | W | Extended Ratio | ||||||||
| S | Standard Ratio | |||||||||
| Material | S | SS 304 | ||||||||
| I | SS 316(L) | |||||||||
| Explosion Proof | N | None | ||||||||
| E | Explosion Type(ExmIICT6 or ExdIIBT6) | |||||||||
| Pressure Rate | N | Normal Pressure | ||||||||
| H | High Pressure | |||||||||
| Connection Type | T | Thread Connection | ||||||||
| F | Flange Connection | |||||||||
| Filter | N | None | ||||||||
| F | With Filter | |||||||||
8. Packing